Home |  About Us |  Location |  Policies |  Catalog |  Contact Us |  Request for Information

Pumps

Ace Logo

line

ACE FMC-150-HYD-206

  Ace Pump FMC 150 Hyd 206
  • The High Performance Pump: 88 GPM at 100 PSI
  • Provides for higher pressure and greater volume for applications with large tanks and longer spray booms
  • The 206 motor requires 7 GPM hydraulic fluid input and fits virtually all tractor hydraulic systems
 

Recommended for:

  • Pressure compensating closed systems
  • Load sensing closed center systems
  • Open center systems up to 16 GPM using internal needle valve bypass

line

ACE FMC-200-HYD-304

  Ace Pump FMC 200F
  • F Model equipped with industry standard flanged connections
  • Ideal for spraying, large tank agitation, liquid transfer, and spray - transfer combinations
 

Recommended for:

  • Pressure Compensating Closed Center Systems
  • Load Sensing Closed Center Systems
  • Open Center Systems up to 20 GPM (75.7 LPM) using internal needle valve bypass

line

ACE FLANGED FMC-200F-HYD-304

  ce Pump FMC 200 Hyd 304
  • 304 motor requires 11 GPM (41.6 LPM) maximum hydraulic fluid input
  • Ideal for spraying, large tank agitation, liquid transfer, and spray - transfer combinations
 

Advantages:

  • Quick installation
  • Easy disassembly for service or replacement
  • Optimized flow passages for improved performance and efficiency
  • Improved performance – oversize suction flange allows use of 3” suction line
  • Reduces assembly time and labor cost

line

ACE FMC-HYD-204
ACE FMC-HYD-210

  Ace Pump FMC Hyp 204-210
  • 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input
  • 210 motor requires 10 GPM (37.9 LPM) maximum hydraulic fluid input
 

Recommended for 204 motor:

  • Pressure Compensating Closed Center Systems
  • Open Center Systems up to 13 GPM(49.2 LPM) using internal needle valve bypass

Recommended for 210 motor:

  • Load Sensing Closed Center Systems
  • Open Center Systems up to 17 GPM (64.4 LPM) using internal needle valve bypass

 

line

ACE PTOC-150-600
ACE PTOC-150-1000

  Ace Pump 150 600
  • The High Performance Pump. 40 GPM at 100 PSI due to increased pulley ratio and larger 1 1/2" x 1 1/4" construction
  • Provides higher pressure and greater volume for applications with large tanks and long spray booms
  • Allows fuel savings by operating at lower engine speeds and still maintains adequate spraying pressures